IB Curb Outside Corner 2

To install IB molded outside corners, place it tightly against the corner. Use hand pressure at the base of the corner, and hold firmly. Tack weld the molded corner on one side, as close to the base as possible for proper position.

Starting where the corner is tacked, progress with welding from inside to outside working uniformly to form the weld at the top and bottom of the molded corner. Repeat this welding process on the opposite side of the molded corner.

Upon completing the installation, ensure all seams and laps are inspected and probed. If deficiencies are found, the area must be re-welded or repaired.