Flashings
Designed for easy installation to reduce rooftop labor and errors. Flashing components come in a variety of colors to ensure a cohesive look on the roof.
Non-Reinforced Detail Flashing Roll - Fabricated from a non-reinforced IB PVC membrane. Utilized for tail work requiring flexible, easy to install membrane.
Cover Strip - Comprised of a polyester scrim reinforced, compounded resin based sheet. Meets ASTM D4434, Type III.
Non-Reinforced Metal Joint Patch - Pre-cut, non-reinforced membrane patches designed for use with bond breaker foil tape at butt joints of IB PVC Clad Metal Drip edge and Gravel stop.
Pipe Flashings - Factory fabricated, dielectrically welded, reinforced IB PVC single ply base and a non-reinforced upper. Variety of sizes available. Pipe Flashing Clamps available.
IB Warning Strip - 6" wide bright yellow PVC membrane rolls.
Foil Tape - High tensile strength aluminum foil coated in epoxy resin with strong, cold weather solvent acrylic adhesive. Silicone paper liner preserves the adhesive for easy use.
Round T-Joint Patch - Mandatory for use on 80mil projects
Pitch Pan - fabricated from PVC Clad Metal constructed with 45mil non-reinforced PVC film laminated to 24 gauge, G90 coated galvanized sheet metal.