Skip to content
  • There are no suggestions because the search field is empty.
800.426.1626

IB Thru-Wall Scupper

← Back to Videos
IB Thru-Wall Scupper

IB Through Wall Scuppers is custom-made to order. After receiving the product, verify that the size matches the scupper opening. After installation of the wall flashing, locate the scupper opening and cut the membrane at each corner. Trim the membrane to expose the scupper opening. Insert the scupper into the opening. Note, a bead of water stop must be applied around the scupper leader prior to or after it is inserted through the wall.

Lift up the IB Through the Wall Scupper membrane target and secure the flange to the wall using approved IB fasteners. Make sure to locate two fasteners per flange. Weld the target flashing to the wall and roof base to form a one-and-a-half-inch welded seam around the entire target flashing. Upon completing the installation, ensure all seams and laps are inspected and probed. If deficiencies are found, the area must be rewelded or repaired.

 

Related Videos

Installation
IB Term Bar
IB Term Bar
Watch Now
Installation
IB Inside Corner
IB Inside Corner
Watch Now
Installation
IB Curb Outside Corner 2
IB Curb Outside Corner 2
Watch Now

Ready to Discuss Your Project?

Are you a commercial building owner or property manager and have some questions about products or specifications? Let us know and one of our team members will be in touch to help answer your questions.

Review my Project