IB Term Bar

IB Termination Bar is used to terminate the membrane to curbs, walls, and other approved surfaces. At the desired termination point of the membrane, apply a bead of IB Water Stop to the vertical surface to prevent water migration behind the membrane. Position the IB Termination Bar so that the lip caulking edge is placed above the top edge membrane. Secure the IB Termination Bar in place using IB-approved fasteners for the substrate type secured at a rate of six inches on the center. Install a bead of IB Solar Seal between the wall substrate and the caulk lip of the IB Termination Bar. Upon completing the installation, ensure all seams and laps are inspected and probed. If deficiencies are found, the area must be re-welded or repaired.